RFID Card Reader Office Building Tempered Glass Full Height Sliding Turnstile Gate
PRODUCT DESCRIPTION
Sliding turnstile gates are in line with the modern trends of all the turnstile series. Thus, you can find them quite popular in office buildings as a pedestrian flow control solution.
As the name suggests, the doors open and close horizontally in a sliding way. Doors are made of acrylic, which can be replaced by the tempered glass as an optional choice.
The cabinet is made of 304 stainless steel which is strong and anti-corrosion for long-term serving. Customers can also use 316 stainless steel as an optional choice but the price will be a little higher.
TECHNICIAL SPECIFICATIONS
Product Name
|
Sliding Turnstile Barrier Gate For Access Control System
|
Model No.
|
SN-SLB02
|
Cabinet Material
|
304 Stainless Steel
|
Dimensions
|
Cabinet:1200*330*980mm
|
Motor Type
|
Single motor
|
Weight
|
About 80 kgs
|
Arm Length
|
≤300mm
|
Passage Width
|
≤600mm
|
Dry Contact
|
12V
|
Material Thickness
|
1.2 to 1.5mm
|
Card-reading Window
|
Two
|
Direction
|
Bi-directional
|
Service Life
|
10 million times
|
Operating Temperature
|
-25℃ ~ +60℃
|
Related Humidity
|
≥90%RH
|
Communication Interface
|
TCP/IP
|
Power Supply
|
AC 220V/110V ±10% 50/60MHZ (optional), DC24V
|
Flow rate
|
30 ~40 persons per minute
|
PRODUCT HIGHLIGHTS
The body is made from brushed stainless steel which creates a seamless and elegant access point to
blend into most indoor environment.
It can be integrated with any kind of access controller system (e.g.: RFID device, Push button, Fingerprint
and Biometric device).
In case of emergency, the Optical Turnstile arm will open automatically to allow free passage.
Optical Turnstiles are suit for elegant and luxury entrance solutions.
PRODUCT FUNCTION AND FEATURES
1. Fault detection and alarm functions, easy to use and maintenance
2. The running status can be programmed and controlled with the built-in keyboard on the main board
3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working
automatically within the prescribed time and reset again after the default delay (till fully reset)
4. Anti-breakthrough function. The gate is locked automatically until opening signal received
5. Support infrared photocell for anti-pinch and reset function
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),
the system will cancel the authority of the current user automatically
7. Gate can be set as normally open or normally closed
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller
needed)
9. Direction can be set as single-direction or bi-direction
10. LED direction indicator
11. Gate auto opens when power off and auto close when power on
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
CONTACT US AT ANY TIME