Double Lane IP54 1.5m Flap sliding Barrier Turnstile AC220V

Optical RFID Swiping Card reader intelligent door entry pedestrian passing baffle gate access control equipment

PRODUCT PARAMETER

PRODUCT PHOTO

PRODUCT FUNCTION AND FEATURES

1. Problem-self-checking function.

2. Control board is with standard electrical interface for the integration of various access control terminal.

3. When power off, arm open automatically and power on again, arm will be held automatically.

4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can be set in the control panel.

5. Auto-reposition function: After card read, passenger not pass within regulated time period, full-height turnstile will cancel this passing right. And the regulated time period for passing can be set by managers.

6. If passenger pass without card read or valid card read, flap barrier will alarm untill passenger get back from the Swing barrier and then take a valid card to be read for passing.

7. Direction display to guide passenger which direction is to go.

8. Anti-rush function: If there is no open signal, arm will be holding tightly.

9. Double anti-clipping function: Photocell anti-clipping and mechanical anti-clipping. When passenger is going through the sliding barrier, photocell will detect out this situation and will not close. After passenger passed, arm will close automatically. During its reposition, if arm meets any obstacle, arm will get back automatcially or stop working for a while with very slight force. 

10. Many options of working ways: Bi-direction card reading; One direction card reading and another no reading; One direction card reading and another freely. And single direction photocell controlled passing and close. Working ways can be set in the control panel.

PRODUCT DIMENSION