IIC Explosion-Proof Hazardous Area Barrier Gate with IP66 Weather Protection and Adjustable Speed Operation

This heavy duty drop arm barrier is designed for vehicle and personnel access control in hazardous environments. It features an IIC explosion-proof rating and is suitable for use in Zone 1 and Zone 2 hazardous areas with explosive gas atmospheres.

Suitable for industries including petroleum, chemical, pharmaceutical, metallurgy, textile, natural gas, and fire protection. Designed for use in Zone 1 and Zone 2 hazardous areas with explosive gas atmospheres of Groups IIA, IIB, and IIC and a Temperature Class of T1 to T4.

• Operation speed can be adjusted
• Slow up and slow down can be adjusted
• The limit angle can be adjusted
• Left and right direction can be quickly interchanged
• The barrier arm can be manually operated in case of power failure
• 433MHz frequency learning code anti-copy remote controller
• Infrared photocell sensor IO signal input function
• Loop detector and radar IO signal anti-collision signal input function
• Up, down and stop IO signal input function
• Counting function
• LED light IO signal output function
• Traffic light IO signal output function
• Up and down in place, normally open and normally closed signal output function
• RS485 communication output function
• Delay arm drop function
• Arm auto-reverse function
• Automatic lifting function when power is off
• IO port single-key cycle up and down function
• Loop detector normally open and normally closed function
• One car and one arm to prevent toll evasion function
• Anti-collision alarm function (requires additional fee for alarm and sensor)
• Fire linkage signal input function
• The IO port closes the signal input function
• Fleet (Peak Mode)