Highway Toll Station Monitoring Systems Barrier Gate DC Servo Motor
SINOMATIC DC Brushless Servo motorized barrier gates model K10 feature newly designed, maintenance-free MicroDrive units that offer 100% more torque and 100% duty cycle. These are the fastest toll barriers available with opening times as fast as 0.6 seconds, with adjustable opening speeds from 0.6s to 6s or more.
Utilizing innovative technology and precision manufacturing, these barriers guarantee exceptional quality and long-term reliability. Lab tested for over 10 million opening/closing cycles without performance degradation.
This barrier redefines performance in non-stop toll applications, providing ideal solutions for high-frequency toll stations with comprehensive functionality, reliability, and sustainability.
Multiple Interface Options
- Wire Control Signal Input (open, close & stop)
- Infrared Photocells
- Loop Detector
- R&G Light signal (Up & Down Limit signal output optional)
- Can be used for counting purposes
- Arm Presence Detection (Optional)
- RS485 Communication (Optional)
- More interfaces available upon request
Technical Specifications
| Max. Straight Arm |
2.5m |
3m |
4.5m |
6m |
| Opening time (sec) |
0.6 |
0.9 |
1~3s |
2~5s |
Speed Range: 0.6s~6s; 0.9s~6s
Motor Rated Power: 100W
Duty Cycle: 100%
Supply Voltage: 220V/110V, or DC24V/12V
Frequency: 50HZ/60HZ
Drive System: SFMCU
Housing Dimensions: W340*D290*H940mm
Weight (without boom): Mechanism: 25Kgs, Gate: 45Kgs
Protection Class: IP54
Temperature Range: -35 to 70 ℃
Key Features and Advantages
No Sensor & Limit Switch
Innovative design eliminates the need for sensors and limit switches. All control is handled precisely by the MicroDrive unit. System consists of only four main parts: mechanical components, motor, control unit, and power supply.
Maintenance Free
DC Brushless Servo motor eliminates carbon brush replacement requirements. Galvanized and powder coated parts provide anti-rust protection for long-term usage with minimal maintenance needs.
24/7 Continuous Operation
Smooth, quiet motorized drive mechanism ensures stable opening and closing operations, offering maximum reliability at fast speeds for non-stop 24/7 usage.
Speed Adjustable
Customizable opening and closing speeds according to requirements. Shorter arms allow for faster speed settings.
Easy Integration
Compatible with access readers, push buttons, or remote controllers via simple dry contact signal. Features automatic closing after delay timer (optional function).
User Friendly
Motorized arms provide comfortable passage while maintaining high-level car flow management efficiency, ideal for toll gate applications.
Auto-Recovery
Manual lift capability during power outages for free exit. Automatic return to closed position when power is restored.
Auto Testing Mode
Control board includes auto testing mode functionality for system verification.
Boom Adjustment Instructions
Horizontal Adjustment
1. Power off the system first
2. Loosen the two screws on the balance rotating arm slightly (do not remove completely)
3. Rotate barrier arm to position the active swing arm at mechanical limit
4. Ensure arm is horizontal and fasten the two screws on balance rotating arm
Vertical Adjustment
After completing horizontal adjustment, power on the system (with arm installed). After system startup, press 'UP' button to check vertical position. If not properly aligned, adjust DP10 parameter in menu settings. Increase DP10 value if barrier arm doesn't open to full 90 degrees; decrease if it opens beyond 90 degrees.
Your message must be between 20-3,000 characters!
