79GHz Vehicle People Radar Sensor Detector Barrier Gate Anti Smashing Parking Distinguish

79GHz Barrier Gate Anti-smashing Parking Management Distinguish Vehicle People Radar Sensor Detector

PRODUCT DESCRIPTION

The Radar Detector TZ7-038 Bluetooth version is a non-contact detection device for targets such as vehicles and pedestrians. It works in the millimeter wave band. The radar detector transmit linear frequency-modulated continuous wave signals to the target to perform high-speed real-time processing on the target's reflected echoes to achieve fast target Detection.

ADVANTAGES

The Radar Vehicle Detector has the advantages of convenient installation and maintenance, no need to damage the road surface, no impact on vehicle access, advanced technology, reliable and stable operation, high cost performance, convenient setting of working distance, all-weather and all-weather work, compatible with straight poles and billboards/fence Advantages such as brake lever application

PRODUCT SPECIFICATIONS

FUNCTION DESCRIPTIONS

●LED light

Two LED lights. Red is power which will stay on when power-on. Green is signal detect which it will on when object is detected and it will be off after object disappear.

●Detectable area setting

Default detection setting is 2.5m straight front,0.7m for left and right side of pole. Detectable area can be set by mechanical button.

●Parameters save

Automatically save the parameters setting like detection area and etc. and remain latest setting after reset.

●RS485 interface

Stable communication. Long communication range.

●Software upgrade

Upgrade on line through serial port. No need to dismantle.

●Steady performance

Free from the impact of sun, dust, rain, snow or other ambient factors.

●Environment calibration

Environment learning/calibration through button.

●Restore factory setting

Restore through only one button function.

Note

Read carefully before use

1. Under the circumstance of trailers access in logistics park, where one radar will cause blind spot and therefore
two radars are needed to ensure passage of vehicles. The installation can not be in parallel with pole. It is
suggested that two radar are installed when the gate is for large and small vehicles. One is 60-70cm and the other one is 100-110cm above the ground.

2. The pole must be in off status when it is reset for background learning.

3. Standing post for the installation of radar must be used if there’s license recognition or other metal object in
front of radar.

4. The radar is not suggested to be used in the road where there are exist large area of well lid (usable for small well lid, check with manufacture before use)

5. It is suggested that the radar not to be used under the circumstance of turning place

6. No staying under the pole and no following of front vehicle under the circumstance of same way out and in.

7. The best position for the installation of radar for advertising pole, fence pole and large-scale fence pole is close to the coming direction of the vehicle

8. Use independent 12V power,1A-2A. No 12V power supplier from gate control board.

9. Radar would fail to detect the intruding object when pole fall exceeding 45%.