Outdoor water proof automatic parking lock remote control battery power

Outdoor water proof automatic parking lock remote control battery power

Product Application:

1, when there is no car in the parking stall, the parking lock will rise up to its highest position
2, when there is a car in the parking stall, the parking lock will fall down to its lowest position
3, if remote controller is needed, firstly you need to cut off the power and wait for three seconds;
secondly you should plug in power again, when the red light is on, press two buttons of controller
at the same time. At this moment, both red light and green light will be on, after the red is off, you
can the remote controller
4, if you want to control the parking lock in the car, you need to put it in the front of the
windscreen, and press the button for 1 or 2 seconds.

Product Size:

Specifications:

Product Features

• Installing friendly: four prepared holes at the bottom of the cabinet makes it easy to install.
• Energy-saving; the battery is a best product in China, power can last for half a year.

•  Safe; the power connection is anti-disconnecting design in case that the user misplaces the battery causing short circuit; battery installation is easy.
• 3. Durable; the cabinet is made of die-casting Zinc alloy with high quality, and the maximum weight of load-bearing is 5 tons; the cabinet is coated with varnish, being water-proof and anti-rust in harsh weather. The sway arm is made of fiber-reinforced nylon, and it will not deform even after car crushing.

• Intelligent self re-positioning; the external force could not change the sway arm position when it is vertical; when the sway arm is forced to a horizontal position, it will re-position vertically, unless the user uses remote control to put it horizontally.

• Noise-free; bearing transmission design of the motor makes almost zero noise. It is beneficial for battery and motor longevity and lesser friction.

• Burglarproof; the mounting bolts are placed inside of the cabinet and without key, no one can open it.

Product installation:

1. Installation Spot; it is suggested to install the parking lock at the very center of parking seat;
2. Installation Ground; to install the parking lock in a dry and smooth concrete ground, and no
radio signal interference around;
3. Installation Steps; drill four corresponding holes 10*5mm in the ground and use four
expansion bolts prepared in the package to fasten it.

Production line:

Packing list:

Main Unit

Battery

Battery charger

Remote controllers * 2

Release Key * 2

Expanse screws * 4

English instruction manual