80GHz IP65 Waterproof Vehicle Detection Radar Sensor with 3-6m Detection Range for Access Control Barriers

This 80GHz microwave radar is widely used across a range of applications, including barriers and gates, loop detector replacement, parking garage and parking lot detection, security detection, vehicle detection, and personnel detection.

Its advanced signal processing technology enables stable detection of both pedestrians and vehicles, effectively preventing "smashing vehicles and people" incidents. The radar offers a compact size, simple installation, and ease of use. It also performs reliably in adverse weather conditions such as harsh light, strong wind, smog, and heavy snowfall.

Please read carefully before installation and use.

• In logistics park trailer scenarios, install one radar above and one below to ensure complete vehicle detection coverage and eliminate blind spots.
• Do not install the radar level with the pole. For cars, install 65cm–75cm from the radar bottom to the driving surface. For trailers, install 100cm–110cm from the radar bottom to the driving surface.
• If the radar's front is obstructed by a license plate recognition system or other objects, install it on a separate pole to avoid interference.
• Not recommended for areas with extensive ground covers or large metal plates. Small area covers or tracks may be used (consult the manufacturer's technical staff).
• Not recommended for sharp turn scenarios or mixed pedestrian/vehicle roads, as pedestrians can interfere with detection.
• In simultaneous vehicle entry/exit scenarios, each vehicle requires a dedicated pole. Avoid following vehicles or lingering under the arm.
• For advertisement arms, barrier arms, or fold arms, the optimal installation faces the incoming vehicle direction. If this is not possible, use dedicated poles per vehicle and avoid lingering under the arm.
• Do not power the radar using the 12V output from the barrier gate motherboard; an independent 12V 1A–2A power supply is required.

The radar indicator light should be facing upward and installed vertically on the barrier box.

• Installation height for cars: 65cm–75cm from the radar bottom to the ground.
• Installation height for large vehicles: 100cm–110cm from the radar bottom to the ground.
• Distance between the radar and the barrier arm: 20cm.