24Ghz Digital Display FMCW Dual mmWave Barrier Gate Radar Detector with 0.5-6 Meters Detection and -40℃~+85℃ Range

Power Supply: Use a low-noise power adapter rated above 12VDC 1A for independent power supply. When connecting gate opening signals in barrier mode, connect radar power supply and gate controller power supply to the same ground (GND connected).

Controller Power: When using gate controller for power supply, ensure output voltage is 12V and output current is not less than 250mA.

Mounting Height: For small car parks, optimum height from radar center to ground is 50-60cm. For large car parks, height can be increased appropriately.

Pole Distance: Distance between radar center and fence pole: octagonal fence pole not less than 20cm, right-angle fence not less than 25cm.

Mounting Surface: Radar mounting surface should be perpendicular to horizontal plane and fixed securely.

Detection Area: Ground within detection range should be flat without obstacles. When angle between passing vehicle and radar is greater than 30 degrees, use road blocks to guide vehicle passage.