Security Spring Bounce Door Bolt Latch Universal Metal Door Electric Lock for Automatic Swing Gate Operator Motor Opener

Universal metal door electric lock designed for automatic swing gate operator motors and openers, providing enhanced security and stability for your gate system.

This automatic gate lock is engineered to deliver additional security and stability to your swing gate opener system. The versatile design accommodates various mounting methods across different gate types.

Note: Mounting hardware is not included with this kit. Users should prepare U-bolts, common bolts, nuts, and washers suitable for their specific gate configuration.

For optimal performance, some gate closure adjustments may be necessary to ensure the lock body closes firmly on the pin in the lock receiver. Please consult your swing gate opener manual for closed position specifications.

Unlock the swing gate opener using the release key to enter manual mode. Manually swing the gate to the closed position. For dual gate systems, ensure both swings form a straight line after closing to facilitate proper lock and receiver positioning.

Dual Gate Systems: Mount the lock body and lock receiver on a gate cross member or solid surface of adjacent gate edges, level with the gate opener.

Ensure lock body and receiver are perfectly aligned and level in all configurations.

Use provided cable ties to temporarily position the lock body on a level mounting surface. Temporarily secure the lock receiver on the opposite gate (dual systems) or gate post (single systems) using cable ties. Slide the lock body left and right until it aligns with the lock receiver, ensuring the lock pin holes line up with the slot in the lock body. Mark the gate or post through the center of the two receiver holes.

Drill holes through the marked positions and attach the lock body using appropriate hardware. Do not use bolts larger than 5/16 inch diameter as they will not fit through the slots.

Drill through the marked positions and attach the lock receiver using prepared mounting bolts, washers, and nuts (pan head screws recommended).

Insert the lock pin through the holes in the lock receiver and secure with a padlock on the bottom hole.

Complete the electrical wiring by following the instructions in your swing gate opener manual.