2000KG Heavy Duty AC Motor 750W Automatic Sliding Gate Operator

2000KG Heavy Duty AC Motor 750W Automatic Sliding Gate Operator

PRODCUT DESCRIPTION

The SL800AC/SL1000AC/SL1500AC/SL2000AC gate opener designed for commercial and industrial use, weight up to 800/1000/1500/2000Kg and operating distance up to 12 meters.

Gate motion is achieved by the rotating output gear of the gate opener driving the gear rack (sold separately) fitted to the moving gate.

MAIN FEATURES

1. AC motor with built-in control unit

2. Keypad/single button interface

3. Alarm lamp, photo beam and safety beam interface

4. User can select auto-close function

5. Soft start and slow stop(smart version, optional)

6. Auto-reverse function when hitting obstacle during closing(smart version, optional)

7. Manual key release design for emergency power failure

8. Gear driven with built-in control board.

9. RF Hopping Code Technology prevents your remote code from being accessible to others.

10. In case of a power outage or an emergency you may also use manual release key.

11. The remote control has 4 buttons, corresponding to open/close/stop.

12. You can add up to 25 extra remotes that can control this system.
 
PRODUCT ADVANTAGES

A. Compatible with a variety of access control systems: Access to infrared sensors, human body sensors, remote control, face recognition attendance machine, ICID card reader, button switch, mobile phone Bluetooth and other switch signals of access control system, so as to automatically open door and automatically delay close door .
B. The holding time, speed and strength of the door can be adjusted within the allowable range.
C. This equipment has the function of resistance reversal, and can also be added with infrared induction for the second protection.
D. It has the function of fire fighting linkage.
 
TECHNICIAL SPECIFICATIONS

Main engine installation
 
a) Dismantle the plastic housing on the main engine before installation and keep the relevant fasteners properly;
b) Please prepare the power line for connecting the mounting plate to the main engine (the number of power supply cable cores should not be less than 3 PCS, the sectional area of cable core should be over 1.5mm² and the length should be determined by users according to the situation on installation spot)
c) Please unlock the main engine before installation, the unlock method is: remove the rubber key cover, insert the key, and open the manual release bar till it rotates by 90° as shown in Figure 5. Then turn the output gear and the gear can be rotated easily;
 
FOR MORE DETAILS, PLEASE CLICK THE BELOW LINK TO DOWNLOAD THE USER MANUAL.
 
SL800,1000,1500,2000AC User Manual.pdf