Access Control Flap Barrier Gate Strangers Capture Photo Record Face Recognition Turnstile

Face Recognition Turnstile Strangers Capture Photo And Record Access Control Software Flap Barrier Gate

PRODUCT DESCRIPTION

A flap barrier turnstile is used when both heightened security and electronic optical turnstile access control are desired. These turnstiles provide a barrier to entry with a very pleasing and inviting appearance. 

Automatic flap barrier turnstile offers a reliable and efficient method to ensure only authorized users are allowed access to each area of a building. A direction indicator, showed that pedestrian access to the current status of, and guide pedestrian correct and smooth passage. The flap barrier, can be integrated for every access control system, such as facial recognition device, fingerprints, QR reader, RFID systems etc.

Access control integration

Can be integrated with all kinds of access control systems. Anti-punch, the barrier will not close if it detects people  inside the passageway. Anti-tailgating, it allows only one person to pass for an authorized card presented.

APPLICATION

A flap barrier turnstile is often used in office buildings and reception areas, lobbies, modern subway and transit stations, and other high-end building entrances.

TECHNICIAL SPECIFICATIONS

MAIN FUNCTION AND FEATURES

1. Fault detection and alarm functions, easy to use and maintenance.

2. The running status can be programmed and controlled with the built-in keyboard on the main board.

3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop

working automatically within the prescribed time and reset again after the default delay (till fully reset).

4. Anti-breakthrough function. The gate is locked automatically until opening signal received.

5. Synchronization functions (for dual gate equipment).

6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),

the system will cancel the authority of the current user automatically.

7. Gate can be set as normally open or normally closed.

8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed).

9. Direction can be set as single-direction or bi-direction.

10. LED direction indicator.

11. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.

12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.

13. Counter function (optional).

14. Support infrared photocell for anti-pinch and reset function.

Application

Sinomatic full automatic flap barrier gate are widely used in the following sites:

• Banks, insurance companies
• Governmental and institutional establishments
• Office buildings, registered offices, administrative sites...
• Schools, universities and colleges
• Sensitive sites : military, nuclear, pharmaceutical, computer centers...
• Airports