Home
>
products
>
Swing Gate Operator
>
|
| Place of Origin | Shenzhen, China. |
| Brand Name | SINOMATIC |
| Certification | CE/ ISO |
| Model Number | SN-PK350DC |
Residential Use DC24V Screw Type With Release Key Electric Automatic Swing Gate Opener
DETAILED PRODUCT DESCRIPTION
The PK300DC/PK350DC gate opener designed for residential courtyard swing gate use, gate leaf weight up to 300 Kg and width up to 2.5m/3m.DC motor, compact structure, smooth operation and low noise.
PRODUCT DIMENSION
PRODUCT SPECIFICATIONS
| Unit Model | PK300DC | PK350DC |
| Power Supply | 220V,50Hz;110V,60Hz | |
| Max. Gate Weight | 300KG / Leaf | |
| Max. Gate Length | 2.5 m / Leaf | 3.0 m / Leaf |
| Motor Power | DC24V,80W | |
| Gate Moving Speed | 20 second per 90 angle | |
| Limit Switch | Stop Block | |
| Recording of up Remotes | 25 | |
| Decoding / Frequency | Rolling code / 433.92MHz | |
| Work Duty | S2 30min | |
| Noise | ≤60dB | |
| Work Temperature | -20°C~70°C | |
| Gross Weight | 16 KG | 19 KG |
MAIN FEATURES
1) Push rod 24V DC electronic swing arm gate opener
2) Soft start slow stop function
3) Obstacle detection in opening and closing
4) Automatic close function, time is adjustable
5) Over-current function meet European safety requirements
6) Safe design to prevent PCB burned for wrong wiring connection
7) Support GSM, solar system, photocell, alarm lamp, electronic lock
8) You can add up to 23 extra remotes that can control this system
9) In case of a power outage or an emergency you may also use manual release bar
Product application
A variety of public access doors, campuses, factories, office buildings, shopping malls, parking lots, etc. Realize contactless automatic door opening and closing.
Installation
PK300DC/PK350DC swing gate opener is applicable to single leaf gate weight less than 300kg, and length of the single leaf swing gate should be less than 2.5m/3m. The drive mode adopts the worm and worm gear to combine the screw rod transmission. This gate opener must be installed inside the enclosure or yard for protection.
Installation Steps
Preparation Before Main Engine Installation
a) Before installing the door opener, please confirm the correct installation of the door to ensure that the door can be easily manually operated, and the door safety stopper can effectively prevent the door to continue moving.
b) Install the electric lock, the distance between the door bottom and ground should be 40-50mm. If not install the electric lock, the distance between door bottom and ground should be ≥20mm;
c) The main engine recommended mounting height is about 300 ~ 800mm from the ground, and
make sure there are reliable fixed points for mounting brackets.
Cable
In order to ensure the normal operation of the door opener and protect the cable from damage, please use PVC pipe laying motor, power cable, and control cables, and separate two PVC pipes to lay (motor and power cable) and (control cable), respectively.
Mounting brackets
In order to install the PK300DC / PK350DC main engines firmly, recommend to use the expansion screws to fix the mounting brackets.
FOR MORE DETAILS, PLEASE REFER TO THE ATTACHED USER MANUAL.
CONTACT US AT ANY TIME
