logo
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED
Email manfrid@sino-matic.com TEL 86-158-1385-6042
Home > Products > Car Parking Lock >
12V DC 6 Sec Running Time Screw Transmission Automatic Parking Lock Car Parking Space Barrier
  • 12V DC 6 Sec Running Time Screw Transmission Automatic Parking Lock Car Parking Space Barrier
  • 12V DC 6 Sec Running Time Screw Transmission Automatic Parking Lock Car Parking Space Barrier
  • 12V DC 6 Sec Running Time Screw Transmission Automatic Parking Lock Car Parking Space Barrier
12V DC 6 Sec Running Time Screw Transmission Automatic Parking Lock Car Parking Space Barrier

12V DC 6 Sec Running Time Screw Transmission Automatic Parking Lock Car Parking Space Barrier

Place of Origin Shenzhen, China.
Brand Name SINOMATIC
Certification CE/ ISO
Model Number SN-BW-O
Product Details
Arm Up Size:
590*500*380mm
Arm Up Height:
380mm
Arm Down Size:
590*500*85mm
Arm Down Height:
85mm
Net Weight:
12KG
Gross Weight:
13.5KG
Voltage:
12V DC
Running Time:
5-6 Sec
Packing:
Neutral Carton
Highlight: 

6 Sec Parking Space Barrier

,

12V Battery Parking Space Barrier

,

Screw Transmission Parking Lot Lock

Payment & Shipping Terms
Minimum Order Quantity
Sample order accepted
Price
negotiable
Packaging Details
Carton/Plywood box/Pallet
Delivery Time
3-7 working days after payment received
Payment Terms
T/T, Western Union,
Supply Ability
3,000 pcs per month
Product Description
6 Sec 12V Battery Screw Transmission Parking Space Barrier
Imported low speed maintenance free reliable DC motor screw transmission parking space barrier
Product Introduction
The BW-O automatic parking lock is equipped with a strong large capacity 12 volt rechargeable battery (approximately 8 hours charging time). Designed for all types of parking spaces, this barrier protects your designated spot by standing guard while you and your vehicle are away. Rest assured that no unauthorized vehicles can occupy your space and cause inconvenience.
Functions & Features
  • Driven by imported low speed maintenance free reliable DC motor, no mechanical reduction gear, low noise operation
  • Built-in spring balance mechanism with screw transmission for light load operation
  • Imported baking paint resistant to fading with pressure-resistant design capable of withstanding 5 tons of pressure
  • High sensitivity short circuit switch for safe and reliable operation with service life of 1 million cycles
  • Reliable microprocessor and IC circuit intelligent control for low power consumption and enhanced reliability
  • Delay locking and unlocking functions with overload and over-voltage circuit protection and resistance alarm
  • Automatic reverse function under external resistance without affecting parking lock control components
  • Screw integration design for convenient disassembly and repair, reducing maintenance costs
  • Front and rear operation modes with waterproof and ultra-low profile design
  • Spring-connected swing arm providing anti-collision protection
Technical Parameters
Name O shape parking lock
Model SN-BW-O
Dimension (arm down) 590x500x85mm
Dimension (arm up) 590x500x380mm
Remote control distance ≤30m
Maximum control current 14A
The delay time of blackout 18s
Up or down time 5s to 6s
Working voltage DC 12V
Net weight 12KG
Gross weight 13.5KG
Packing dimension 63x53x12cm
Installation Steps
  1. Clean all surfaces where the Parking Lock is to be installed with dish-washing liquid (or similar) in warm water then allow time to dry. Make sure dust, oil and grease are removed from the surface area.
  2. To fix the Parking Lock to the surface, place the unit on the ground with the sign facing the entry point. Centre it from left to right and approx. 0 mm - 100mm from the front entry point of your parking space.
  3. Mark the ground with a pencil using the 4 holes in the Parking Lock base to locate the exact position of the 3 holes to be drilled into the surface. Drill holes using an impact drill or similar. Holes (3 in total) must be 50mm (min) deep for the tamper-proof bolts (supplied) to fit.
  4. Clean the dust away from the area from around the holes and the surface.
  5. Cover the underside base of the Parking Lock unit with liquid nails or silicon. Make an "S" pattern when applying the adhesive for extra strength.
  6. Position Parking Lock over the holes and insert tamper-proof bolts. Screw bolts with the large screwdriver until unit is secure. It is very important to tighten screws securely as any movement will cause the unit to come free when in use.
  7. Connect the battery and the remote to the matching black locating sockets.
  8. Close the lid of the battery box and lock it. You are now ready to operate your Parking Lock with the remote control.
Case Reference
12V DC 6 Sec Running Time Screw Transmission Automatic Parking Lock Car Parking Space Barrier 0
Packaging List
  • 1 x BW-O unit
  • 1 x Charger 220±10% volt
  • 2 x Remote Controls
  • 3 x Tamper-proof bolts 50mm
  • 2 x Keys for control box
  • 1 x Installation and Operation Manual
Maintenance & Troubleshooting
A. If the Parking Lock does not operate:
  • Check if the battery is empty or not − take out and charge for 8 hours.
  • Check if the remote control battery is empty or not - unscrew the back of the remote and replace the battery.
  • Make sure there are no loose connections in the control box - secure the connection of the plugs and sockets
  • When you get in your car, always make sure the Parking Barrier is down flat on the ground. This will avoid any damage to your car and the Parking Lock - press the remote to make the Parking Barrier lay flat.
B. The Parking Barrier base has become unstable and moves when operating
Re-tighten tamper-proof bolts with large screwdriver or remove and replace bolts.
Safety Instructions
  • Only operate your remote control when the Parking Lock is in your full view.
  • Do not press the remote control while you are over the Parking Lock in your car.
  • Always check that your Parking Lock has not risen under your car, before you drive away from your parking space. This may occur if you press the remote by mistake while it is in your pocket or handbag.
  • The Parking Lock will stop when pressure is applied while in up or down motion. The remote must then be pressed to continue or to change direction of the motion, once the pressure is released.
  • Avoid driving onto the unit with your car wheels.
  • Do not let children play with the remote control.

Tags:

remote control parking lock,

car parking space protector,

automatic parking lock

Recommended Products

CONTACT US AT ANY TIME

+8615813856042
3F, Bldg B, No. 55 Langbei Vlg, Tongde Community, Baolong, Longgang, Shenzhen, 518116, China.
8615813856042
manfrid2012
+8615813856042 Wechat
manfrid@sino-matic.com
Send your inquiry directly to us