Anti terror Vehicle control automatic traffic spikes Surface mounting with sharp blades

Anti terror Vehicle control automatic traffic spikes Surface mounting with sharp blades

Brief introduction:

As the barrier raises, the tyre killer teeth retract below ground level, providing safe access for authorised vehicles. When the vehicle has passed, the barrier lowers and the teeth return to the active position, ensuring total protection from unauthorised vehicle intrusion. Tyre killer barriers may be used with any type of access control system, and the use of an underground detector loop acts as a safety device to prevent the barrier operating when an authorised vehicle is stationary over the teeth.

Main Features:

1. Can combine with other control equipment making the barrier auto control

2. Solid and endurable structure, the largest traffic capacity is up to 60t

3. The system is safe, reliable and stable

4. Quite and fast

5. The working environment is -40° C to +70° C

6. Low trouble rate, high reliability, long life cycle,

7. Easy maintenance, and the rate is low

8. Perform exactly and operate steadily, making the barrier low noise

9. In case of electric failure or trouble, the movable barrier can be manually operated to return to the horizontal position, making the cars pass smooth

Tire killer system consists:

Tyre killer system consists of a main frame, electric transmission station and electric control box.

• Main frame: mainly include A3 steel, steel blade, base and drive shaft. The whole body is steel structure , adopts GB A3 carbon steel plate and channel steel welding with high-strength load-bearing capacity and anti-collision capacity; Inside body without electrical appliances and line settings , which is waterproof and safe. The device is mounted on the driveway or designated location to limit vehicle traffic.
• The electric transmission station: mainly include motor, gear box, limit switch, optical axis,bearings, base and a full transmission components.Inner structure no gear, no rotating belt, no maintenance,more stable and longer lift. It’s the power source of the tyre killer system, mounted on the side of the main frame. When outage, can drop down or lift up the steel blade manually.
• Electric control part: mainly include control board, transformer, relays, long distance remote control device and wire control device.

Specifications of automatic tyre killer

Photo of tyre killer: