||Auto or manual
||105mm x 78mm x 26mm
||RS485, on and off signal
24GHz Anti-collision don't need to cut the ground, the installation is simple.
It can distinguish pedestrians and vehicles, with strong anti-interference, safety and reliability.
Wide range of use, most of the road gates in the general market, compatible with straight rod machines, fence machines, curved arms, advertising gates, airborne gates.
Internal circuit adopts high quality electronic components, with stable performance.
The Vehicle Detector is mainly used to detect the existence and passing of vehicles.
Are you still troubled to install loop detector and loops with the below disadvantages?
1) Cutting ground-Waste time and not good looking;
2) Complex wiring-Messy and Difficult;
3) Mud road-Cannot fix the loop;
4) Cannot detect big truck, trailer or other vehicles with high-bed.
Why choose barrier radar detector?
1) Can replace loop detector completely; no wiring layout, save time and cost.
2) Easy installation; Easy parameters setting; Adjustable distance from 1 to 6m.
3) Work in range of 24-24.5Ghz without effects from any climatic environment.
4) Can effectively distinguish vehicles and humans to avoid any hitting.
5) Can be used for trigger detection, e.g. trigger camera to capture the picture.
6) Can be used to trigger the alarm in the warning zone.
7) Can record the traffic and no data is lost when power is off.
Cost-effective short range 24GHz radar sensor for access control
It adopts FMCW modulation mode, which can accurately detect people & vehicles, and it has high ability to
distinguish people & vehicles, so to achieve anti-hit function.
Trigger radar & Anti-hit radar
Advantages in the application of access control system
1, Advanced signal processing technology can be used to detect pedestrians & vehicles stably, and effectively prevent "smashing vehicles and people".
2, Simple installation, no need to destroy the ground, greatly reducing the difficulty of construction and maintenance costs.
3, It has communication function of RS485, which is convenient and quick for parameter configuration.
4, Radar detection distance and area can be adjusted, and it can effectively prevent escape incidents.
5, Integrated design, small and beautiful, easy to integrate inside & outside.
6, Strong environmental adaptability, radar performance is not affected by light, dust, rain and snow, haze and other harsh environment.
7, Long service life: The life of the ground coil is generally 1~2 years, but the radar can reach 5~10 years.
Radar Detector Installation
1) The trigger radar and the anti-smash radar should be installed perpendicular to the lane's direction. The anti-smash radar is installed on the cabinet below the barrier boom. The trigger radar is installed on the special bracket for the radar installation. The optimal height from the ground to the radar center is 0.6 meters.
2) The barrier's cabinet must be fixed firmly to avoid shaking when the barrier is working.
3) Within the detection area, there should be no obstacles other than the barrier boom, e.g. traffic cones, isolation bars, signs, etc..
4) Please update the radar background in time after the environment in the detecting area is changed.
( The above picture's ratio is 10:1. The lane width is 3 meters and the trigger distance is 4 meters)
5) Anti-smash Radar Detector Installation Diagram