|Place of Origin:||SHENZHEN, CHINA|
|Minimum Order Quantity:||1|
|Delivery Time:||5-10 working days after payment received|
|Payment Terms:||T/T or western Union|
|Supply Ability:||3,000pcs per month|
|Flow Rate:||30 Person/minute||Surface Treatment:||Wire Drawing|
|Motor Voltage:||DC 24V||Flap Opening / Closing Time:||1s|
DC Motor Flap Barrier Turnstile,
Waist Height Flap Barrier Turnstile,
SS304 Retractable Flap Barrier
DC Motor Waist Height Flap Turnstile Barrier Gate With Fault Self Checking Function
Flap barrier gate, also called wing gate is one of the passage management equipment, mainly used for pedestrian
passage management; it has the characteristics of fast opening, safety, and convenience, and is an ideal managing
and channeling device for high-frequency pedestrian access; it has been widely used in airports, subway stations,
and railway stations , docks, scenic spots, parks, student dormitories, pedestrian passages, etc.
1) Special stretch wing design, save closing time, improve the passage speed, prevent trailing, increase the security level.
2) Especially suitable for ticketing channel, to avoid fare evasion behaviors.
3) Unified and standard external electrical interface, which can be connected with various reading and writing devices,
which is convenient for system integration.
Sinomatic full automatic flap barrier gate are widely used in the following sites:
MAIN FUNCTION AND FEATURES
1. Fault detection and alarm functions, easy to use and maintenance.
2. The running status can be programmed and controlled with the built-in keyboard on the main board.
3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop
working automatically within the prescribed time and reset again after the default delay (till fully reset).
4. Anti-breakthrough function. The gate is locked automatically until opening signal received.
5. Synchronization functions (for dual gate equipment).
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),
the system will cancel the authority of the current user automatically.
7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed).
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function.
Contact Person: Mr. Manfrid Lee