|Place of Origin:||SHENZHEN, CHINA|
|Minimum Order Quantity:||1|
|Delivery Time:||5-10 working days after payment received|
|Payment Terms:||T/T or western Union|
|Supply Ability:||3,000pcs per month|
|Max Flow Rate:||30 Person Per Minute||Capacitor:||Yes|
|Control Signal:||Relay/dry Contact Signal||IP Grade:||IP54|
|Motor Type:||BLDC Motor||Package:||Wooden Box|
SS304 Entrance Retractable Barrier Gate,
BLDC Motor Retractable Barrier Gate,
DC24V Turnstile Flap Barrier
304 Stainless Steel Entrance Automatic And Manual Fast Speed Retractable Barrier Gate
Working principle of flap barrier
The working principle of the flap barrier: a fast retractable door is embedded in each of the two wings of the
passage. When the device detects the opening signal, the two doors will be synchronized and quickly
retracted to make the current passage in a barrier-free state. The main control panel of the machine has
pulse signal instructions, the control system directs the work of the mechanical system, and the gate is opened.
When the pedestrian passes the sensing point, the machine control board informs the movement of the electric
switch. Illegal intrusion into the machine alarms, there are electronic anti-pinch and mechanical anti-pinch, the g
ate opens and closes in place to become a dead point mechanism, and pedestrians cannot be opened, which
improves the reliability of traffic.
Adaptation range of wing gate
It is suitable for one-way or two-way control of the flow of people entrance and exit channels.
|Material||304 stainless steel|
|Drive motor||DC24V DC brushless motor|
|Channel width||550 to 600MM|
|Fire interface||provide relay fire linkage interface|
|Humidity||≤90%( No condensation)|
|Working Environment||Indoor / Outdoor (Shelter)|
|Gate opening and closing time||0.6 seconds|
40 people / minute (normally open)
25-30 people / minute (normally closed)
|Power-on time||The time required to enter the passage state after power-on is 3s.|
|Service Life||5 million cycles|
|Communication interface||standard RS485/232 dual serial port interface, distance ≤1200 meters|
|Input interface||relay switch signal or 12V level signal or 12V pulse signal with pulse width >100ms, drive current >10mA|
MAIN FUNCTION AND FEATURES
1.With fault self-test and alarm prompt function, convenient for user maintenance and use.
2.Through the built-in small push-pull on the main control board, device operating state can be programed.
3.The mechanical structure has anti-pinch and anti-collision function. When the swing arm is blocked during
the reset process, the motor automatically stops working within the specified time. Reset again after the default
delay (until reset), and the force is very small (≤ 2kg).(In the extreme case, all infrared rays are disabled, and
the movement still has mechanical anti-pinch function, and the strength is small and will not cause harm to
the human body)
4. Illegal intrusion, trailing alarm, reverse intrusion gate automatically closes
5.Anti-shock function, the arm is automatically locked when no open signal is received.
6.Telescopic arms are adjustable synchronously (for double pendulum)
7.With automatic reset function. After the switch is opened, the system will automatically cancel the user's
permission for the pass when there is no pass within the specified time.The reset time is adjustable from 1s
to 60s (the system default time is 10s). After the power is cut off, the channel is automatically opened
(in accordance with fire protection requirements), and the power-on channel is automatically closed.
8.Infrared sensor reset, infrared sensor anti-trap function (configure 5 pairs of infrared)
9.It can be connected with a variety of devices such as access control systems, consumer systems, electronic
ticket systems, biometric systems, and electrostatic testers.
10.The one-way or two-way control personnel can enter and exit, and the infrared sensing in and out channels.
11.Voice prompt function.
12.Remote control and management can be achieved directly through the management computer.
Our company advantages
1. Our Factory has more than 20 years OEM/ODM experiences in the line of access control turnstile and barrier.
2. Prompt delivery time. Usually we keep stock of standard model which ensure the prompt delivery.
3. We accept OEM/ODM orders to meet the requirements of clients.
4. Trial order is acceptable. Clients can buy sample order and test it before bulk order.
5. Online technical support makes it carefree to be our business partner.
6. A variety of transportation for your choice. Sea shipment, air cargo or express, depends on your demand.
7. Factory can be visited on working days. Clients are warmly welcome to visit our factory.
Contact Person: Mr. Manfrid Lee